某硅铁电炉烟气净化工艺设计-毕业设计文献.docVIP

xx工业大学城市学院 毕业设计说明书 作 者： xx 学 号： 116738 系： 能源与环境工程系 专 业： 环境工程 题 目： 某硅铁电炉烟气净化系统工艺设计 指导者： xx 讲师 评阅者： xx 教授 2015 年 6 月 11 日 毕业设计中文摘要 某硅铁电炉烟气净化系统工艺设计 摘要： 本次工艺所涉到的硅铁生产的过程当中，将会产出大量高温的含尘烟气，如果不经处置直接排放到大气环境中会对环境造成重大的影响，使得硅铁电炉烟气的处置迫在眉睫，并且净化过程中捕集到的粉尘可以回收后作为建筑材料加以利用。本设计通过对电除尘器和袋式除尘器的特性比较并且结合了烟气的特点，选取了外滤式脉冲袋式除尘器为某硅铁电炉烟气净化系统的主要处理装置。根据烟气量、烟气温度和烟气含尘浓度，使得标准状况下烟尘排放的浓度为50mg/m3,本次设计计算了冷却器、袋式除尘器、烟囱的各项参数以及管段的沿程阻力损失和局部阻力损失，根据总阻力损失和风量对风机和电动机进行选型，整个除尘系统的除尘效率可以达到99.9%，最终符合《大气污染综合排放标准》。 关键词：硅铁电炉烟气；袋式除尘器；冷却器；烟囱 毕业设计外文摘要 Title ：Silicon-iron electric-furnace flue gas purification system design process Abstract： The production process of Silicon-iron electric-furnace will produce a large number of high temperature. If not discharged and disposed directly into the atmosphere it will cause serious pollution to the environment,so making the flue gas treatment is imminent.The dust captured in the purification process can be recycled as construction material.This design based on the characteristics compare of electrostatic precipitators and bag filter, combined with the characteristics of the flue gas and selected the outside filter pulse bag filter for the silicon-iron electric-furnace flue gas purification system as the main processing equipment. According to the smoke gas, flue gas temperature and dust concentration of flue gas and makimg bid condition dust emission concentration of 50 mg/m3, the design calculat various parameters of the cooler, bag filter, chimney and the frictional resistance loss and local resistance loss.Selecting fan and motor according to the total resistance loss and air volume .Finally,the whole dust removal efficiency can reach 99.9% and in accordance with the integrated emission standard of air pollution. Keywords：Silicon-iron electric-furnace flue gas；Bag filter