flotherm_flomcad练习.pdfVIP

FLO/MCAD V3.1 Training Course FLO/MCAD Tutorial 1 – Local Simplification Local Simplification Methods Local simplification allows for precise geometry manipulation. Selected faces or features can be removed, flattened, leveled etc. This tutorial tries all the local simplification operations to convert the original geometry into a more desirable simplified form. Action Result Click on [External/Import SAT…] and load in the file: team.sat Select “mm” for units when prompted. Change the current selection mode from MCAD Part to Face. This can be done either by right mouse clicking on the background of the view to pop-up the selection list or by accessing the list in the lower right corner of the FLO/MCAD window. Select the non-planar faces on the High X side of the object using the Control key to enable mutliple selection. FLOMCAD/LC/11/00 V3 Issue 2.0 2000 Flomerics Ltd. Tutorial 1 Page 1 FLO/MCAD V3.1 Training Course Action Result Bring up local simplify [Tools/Local Simplify] and Add Bounding Box . This can also be done by using the + hot key. Select the circular and side faces of the small cylindirical hump using the Control key to enable mutliple selection. Using local simplify [Tools/Local Simplify] Subtract Bounding Box. This can also be done by using the - hot key. First select the main High Y surface of the object. st 1 selected Then, pressing the Control key, select the High Y face of the remaining rasied hump. 2nd selected Using local simplify [Tools/Local Simplify] Level the faces. This