FX30青贮收割机应用演示课件文.pptVIP

The attachment is clamped on by a tierod with 2 nuts. An hydrostatic pump drives the attachment drive gearbox on the left hand side of the Chopperbody. The length of cut is variable between 4 and 10 mm in the low range and between 8 and 20 mm in the high. The selection between high and low is made on the HydroLOC gearbox on the right hand side of the Chopperbody. On the attachment drive gearbox are 2 output shafts:1. 300-750 rpm for the pick-ups, 300N6 corn head and the snapper headers2. 500-1260 rpm for the RI corn headers and DC510 The hydrostatic motor is blocked by a stop valve after