PB7200呼吸器Service Manual Ch19.pdf

SECTION SECTION Repair: Panels and Connector Bracket 19 19 The cabinet top panel and top cover serve as protective covers for ventilator internal components and as a supportive surface for external ventilator accessories. The ventilator back panel assembly and optional inner back panel serve as protective covers for the ventilator internal components. The connector bracket provides electrical connectors for external devices. Before repairing the ventilator, familiarize yourself with the warnings, cautions, and general repair instructions in Section 8. Warning To prevent personal injury and equipment or property damage, ensure that electrical power and pneumatic sources are disconnected before servicing ventilator. Take precautions to prevent foreign objects and debris from entering the ventilator. Place a protective temporary cover, such as an ESD mat, over the ventilator exterior. 19.1 Top Cabinet Panel and Top Cover There are two versions of the top cabinet panel: an unmodified version and a modified version with mounting brackets for the 7250 Metabolic Monitor. 19.1.1 Removal/Installation Remove the top cabinet panel and top cover from the ventilator, following the steps below. Install the top cabinet panel by reversing the removal procedures. 1. Remove top cabinet panel. a. For unmodified panels, remove by lifting up