control of hazardous energy - Occupational Safety and Health ...(PPTX-41)文档文档.pptVIP

  • 10
  • 0
  • 约1.47万字
  • 约 41页
  • 2018-02-27 发布于湖北
  • 举报

control of hazardous energy - Occupational Safety and Health ...(PPTX-41)文档文档.ppt

control of hazardous energy - Occupational Safety and Health ...(PPTX-41)文档文档

CONTROL OF HAZARDOUS ENERGY (LOCKOUT/TAGOUT) OSHA 29 C FR 1910-147 1 “This material was produced under grant numbers SH-22300-11-60-F-17 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.” 2 What is LOCKOUT/TAGOUT? “Lockout/Tagout” refers to specific practices and procedures to safeguard employees from the unexpected energization or startup of machinery and equipment, or the release of hazardous energy during service or maintenance activities. “Lockout” is the placement of a lockout device on an energy-isolating device, in accordance with an established procedure, ensuring that the energy-isolating device and the equipment being controlled cannot be operated until the lockout device is removed. “Tagout” is the placement of a tagout device on an energy-isolating device, in accordance with an established procedure, to indicate that the energy-isolating device and the equipment being controlled may not be operated until the tagout device is removed. References: “OSHA Standard for the Control of Hazardous Energy (Lockout / Tagout)” 29 CFR 1910.147 and OSHA Publication 3120 “Control of Hazardous Energy – Lockout/Tagout” 3 Lockout/Tagout What is lockout/tagout. What is hazardous energy. Causes of fatalities/injuries. When lockout/tagout applies. Employer responsibility. Employee training. Lockout/tagout procedures required. Types of lockout devices. Requirement for tags. Training Objectives: 4 LOCKOUT/TAGOUT The OSHA Standard for the Control of Hazardous Energy (Lockout/Tagout) 29 CFR 1910.147 covers the servicing and maintenance of machines and equipment in which the unexpected start-up or the release of stored energy could cause injury to employees. 5 What Does LOTO Require? Lockout/Tagout requires, in part, that a designated individual

文档评论(0)

1亿VIP精品文档

相关文档