课程设计说明书-成都市某公共建筑的的空调系统精选.docxVIP

摘要本次设计的是成都市某公共建筑的的空调系统。针对该综合大楼的功能要求和特点，以及该地气象条件和空调要求，参考有关文献资料对该楼的中央空调系统进行系统规划、设计计算和设备选型。首先计算各房间的冷湿负荷；计算完冷、湿负荷以后，接下来是风量的计算，风量的计算包括送风量和回风量的计算。风量的计算之初先在i-d图上划出空气的处理过程，然后根据前面的负荷计算结果进行计算，最后根据需要的风量和冷量选择空气处理设备和每个房间的风口。在此基础上，通过对各种空调方式的比较，选择了合理的空调方式。考虑到本建筑的特点,主楼采用多联机空调系统。裙楼采用分体空调设计。根据各种计算结果，通过性比分析，进行了设备选型，确保设备容量、压强、噪声等方面满足要求。本中央空调系统的设计力求达到经济、舒适、方便、实用，并尽可能满足节能要求。关键词:多联机空调系统；分体空调；性比分析。ABSTRACTWhat this design is Chengdu some public building air-conditioning system. In view of should synthesize the building the function request and the characteristic, as well as this meteorological condition and the air conditioning request, the reference related literature material carries on the system planning, the design calculation and the equipment shaping to this buildings central air-conditioning system. Firstly, calculating cooling load and damp load of type room . After counting the cooling load and damp load, The mission is the account of air quantity, including the air delivering and air returning. At the beginning of air accounting , we should draw the process of air condition on the fig. i-d, then counting by the result. At last choosing the equipments of air condition and air draught in every rooms by the cooling load and air quantity. Considered this the characteristic of this construction ,the main building usesVRV air-conditioning system and the attacted building uses separated air-conditioning.According to the results, the best options are selected. And the options can assure that they would meet the requirements of volume, pressure and noises, etc. This design aims to a economic, comfortable and convenientand practical air-conditioning system. Also it should meet the energy-saving requirement as possible.Key words: VRV air-conditioningsystem；Separated air-conditioning；The function compare目录·摘要1ABSTRACT2目录31设计概况51.1 工程概况51.2 设计依据51.3 设计资料51.3.1 室外设计参数51.3.2 室内设计参数61.3.3 建筑材料选择62 冷负荷计算步骤72.1 冷、湿负荷的概念72.2 空调房间负荷计算理论72.2.1 夏季冷负荷的计算72.2.2 计算举例102.2.3 湿负荷的计算132.2.4 计算举例142.2.5 新风