高速电主轴轴心轨迹的测试与分析——毕业设计论文精选.docxVIP

重庆大学本科学生毕业设计（论文）高速电主轴轴心轨迹测试与分析学 生：学 号：指导教师：助理指导教师： 专 业：机械电子工程重庆大学机械学院二O一二年六月Graduation Design(Thesis) of Chongqing UniversityTest and analysis of orbit of shaft center for high-speed electric spindle systemUndergraduate: Guo JinlongSupervisor: Prof. He Ye Assistant Supervisor : Lecturer Shan WentaoMajor: Mechanical and Electronic EngineeringCollege of Mechanical EngineeringChongqing UniversityJune 2012摘 要由于高速电主轴系统复杂多变的运行环境以及未建模动态和外部干扰等众多难以描述的因素，使得高速电主轴系统的故障分析变得相当困难，本文提出一种改进的实验方法来研究运行高速电主轴的振动特性.首先，运用LMS数据采集分析仪和LMS信号分析软件构建该型号电主轴的振动信号测试处理系统，然后运用谐波小波超窄带高分辨率检波的优良特性及微弱信号提取功能，从复杂的实验环境中提取主轴振动信号并进行谐波小波分析，再利用谐波小波包的局部频域细化分析能力研究了主轴在八种不同转速下的振动频谱图，并成功提纯了转子轴心轨迹，为后续的故障诊断提供了验证依据。最后以170MD15Y20型高速电主轴为研究对象，分析了主轴在负载相同、转速不同下的八种不同振动信号,将频率分量分成重复出现部分和规则出现两部分进行对比研究。所得到的实验结果与理论分析相符，从而验证了所用方法的正确性。关键词：高速电主轴,振动,谐波小波分析,故障诊断 ABSTRACT Due to the high-speed electric spindle system, the complex and volatile operating environment, as well as unmodeled dynamics and external disturbances, and many other hard to describe the factors that makes high-speed electric spindle system failure analysis becomes very difficult, this paper presents an improved experimental method to study the run high-speed electric spindle vibration. first, the use of the LMS data acquisition analyzer and LMS signal analysis software to build the model of electric spindle vibration signal test processing system, and then use the fine features of the harmonic wavelet ultra-narrow-band high-resolution detector and a weak signal extraction function, spindle vibration signal extracted from the complex experimental environment and the harmonic wavelet analysis, harmonic wavelet packet analysis capabilities of the local frequency domain refinement of the vibration frequency spectrum of the spindle in eight different speed, and successfully purified the rotor axis orbit validation basis for the subsequent fault diagnosis. Finally, 170MD15Y20 high-speed electric spindle for the study, analysis of the spindle at the same load,