工程硕士论文_沥青路面材料质量控制和施工关键工序研究论文报告.docVIP

摘 要 近年来由于我国高速公路建设的飞快发展和汽车数量持续大幅增加，高速公路沥青路面频繁出现早期破坏现象。分析主要原因与路面本身材料选择和施工关键工序的控制不当有关，因此，针对沥青路面材料质量选择和施工关键工序施工质量研究迫在眉睫。吉草高速是吉林省干线公路黑大公路（G202）的重要组成部分，主要承担辽宁、吉林、黑龙江三省的客货运输，该工程是吉林省 “十一.五”规划的重点工程，受到社会各界的普通关注，工程质量的优劣是整个建设项目的核心。 本次研究主要针对我国高速公路沥青混合料路面施工过程中普通出现的质量问题，以吉草高速建设项目为依托，对沥青路面的原材料的选择、沥青混合料的拌和运输、摊铺及碾压等施工工序以及路面平整度和压实度控制方法进行研究，提出沥青混合料施工过程中各关键工序的流程质量控制的要点。 在进行大量调研和试验的基础上，提出了吉草高速材料选择的具体标准，指导吉草高速路面材料的优选；在进行室内试验后，对沥青混合料目标配合比设计、生产配合比设计和生产配合比进行验证并对材料选用以及施工过程中容易发生的问题进行了深入研究，并提供了相应的解决方法。 最后从沥青混合料施工时通常出现的离析、压实度不足或过度及平整度不足等现象作为切入点，分别对这三种问题进行了深入研究，提出了改善方法和措施。 关键词：沥青混合料、路面材料、质量控制、离析、压实度、平整度。Abstract In recent years due to the rapid development of highway in our country and the cars continues to increase, the early damage of asphalt pavement on highway occur frequently.the Analysis indicate the main reason of the above problems is connected with improper material selection and controlment of key process, therefore, the study on the selection of asphalt pavement material and the quality control is imminent.Ji Cao highway is an important part of hei da highway(G202) in jilin province, which mainly undertake the transport of both travellers and goods that belong to the three provinces on Liaoning, jilin, heilongjiang, the Ji Cao highway project is key projects being planed in jilin province during 11th five, which is commonly payed attention to by all sectors of the society, the merits of the project quality is the core of the whole construction project. This study mainly aims at the common quality problems of the asphalt pavement in the construction process of our country highway, which based on Ji Cao highway projects, by studying the selection of the raw material, both malaxtion and transportation of asphalt mixture,both pavement and rolling compaction of asphalt mixture, the contollabe methed of surface evenness and the degree of compaction of pavement, this article put forward the key point of quality control in the process of asphalt mixture construction . On the basis of a