Strength and behavior of light gage steel shear diaphragms轻型钢剪切隔膜的强度和性能.pdfVIP

Missouri University of Science and Technology Scholars Mine AISI-Specifications for the Design of Cold-Formed Wei-Wen Yu Center for Cold-Formed Steel Steel Structural Members Structures 7-1-1967 Strength and behavior of light-gage steel shear diaphragms Larry D. Luttrell University of M issouri--Rolla Follow this and additional works at : /ccfss-aisi-spec Part of the Structural Engineering Commons Recommended Citation Luttrell, Larry D., Strength and behavior of light-gage steel shear diaphragms (1967). AISI-Sp ecific ations for the Desig n of Cold-Formed Steel Structural Members. Paper 55. /ccfss-aisi-spec/55 This Technical Report is brought to you for free and open access y the Wei-Wen Yu Center for Cold-Formed Steel Structures at Scholars Mine. It has been accepted for inclusion in AISI-Specifications for the Design of Cold-Formed Steel Structural Members y an authorized administrator of Scholars Mine. For more information, please contact weaverjr@. CORNELL ENG I NEERING RESEARCH BULLETIN 0 67-1 Strength and behavior of light-gage steel shear diaphragms By Larry D. Luttrell DEPARTMENT OF STRUCTURAL ENGINEERING 0 SCHOOL OF CIVIL ENGINEERING 0 CORNELL UNIVERSITY ITHACA, NEW YORK A RESEARCH PROJECT SPONSORED BY THE AMERICAN IRON AND STEEL INSTITUTE 0 JULY, 1967 Strength and behavior of light-gage steel shear diaphragms By Larry D. Luttrell ACKNOWLEDGEMENTS The investigation reported in this bulletin is part of an extensive re- search undertaking on light-gage, cold-formed steel structures. It was sponsored by the American Iron and Steel Institute and