中水电站厂房结构设计 毕业设计.doc

中水电站厂房结构设计-毕业设计 Abstract This graduation design for building structure design of water conservancy and Hydropower Engineering in hydropower station. The design of hydropower station plant 66m, span 18m, the design of space 6m, the slope of trapezoid steel roof truss, crane beam and frame structure for the reinforced concrete structure. Structural design is the priority among priorities to ensure the safety, the principle is to guarantee the safety, applicability, durability, and make the design reasonable economy. The structure design according to the known data, the main contents are: the typical cross section of hydropower plant, layout of workshop structure, crane beam design and reinforcement, slope of trapezoid steel roof design, layout design and structural frame pillar reinforcement, and the corresponding construction drawing. Bearing structure of crane beam is directly under the crane load, is an important structure of the workshop, the design of crane beam is simply supported structure, cross section by T. Steel truss design, assuming that all the members in the same plane, member center lines converge on the centre of the node, and each node is the ideal hinge, without considering the effects of secondary stress calculation of axial force, the application frame internal force coefficient method. Bent frame structure is simplified as a plane structure is calculated, which assumes that the bent frame column is hinged at the lower end and roof, and the top surface of the horizontal displacement of foundation consolidation, equal at both ends of the truss column, not considering the spatial effect of shelving. Keywords：building structure layout, trapezoid steel roof truss, crane beam design, frame structure design  目录 绪 论 1 第一章 TH水电站工程原始资料 2 一 工程概况 2 自然条件 2 厂房尺寸 2 四 主要水力机械及设备 3 4 一 横向定位轴线 4 二 纵向定位轴线 4 三 柱网布置 4 第章 吊车梁设计 4 4 二 吊车梁荷载计算 5 （一）吊车梁自重计算 5 二集中荷载计算 6 （三）横向水平制动力计算 6 7 （）吊车梁弯矩计算 7 （）吊车梁剪力设计值计算 8 （）吊车