超佳软件英文说明书.doc

SuperBest Glass Cutting Optimization Software using Guide Order data input 1). Order Input order’s name here. Normally, the same sort product have to be cut together which in the same raw piece of glass, the same thickness and the same producing time, e.g., toughen 5mm, toughenetc. The content would be defaulted as save file name. 2). Descript Simple description of the order or the order’s name. For instance, interlayer glass. 3). Material input Input the needed materials directly. Usually, choose the common glass material from Material warehouse and put them into. Click慡elect? then the chosen materials would be added into the optimized order automatically. You can choose several or more materials but please try best to assure the sorts and thickness the same. 4). Grid Here means single grid. Four times milling for each piece of glass’s borders. Line and cross milled each two times. Here should be inputted two times milling sum of the line and cross, e.g., if mills an 1mm border, then you should input 2mm DM.(Note: The Grid in profiled graphic design means each border’s milling quantity. Grid will not work for the profiled graphic design.) 5). Break DM Most of the time, the glass edges can not break off easily if the edge distance too small. Here you can input the least break off DM. Different thickness, different DM. Normally; it’s 2 times of the thickness. For better use of the left material, ask the milling line do the grid of the bigger piece if that is such kind graphic. Set the DM to safe DM to avoid this situation. 6). Produce Date It’s the producing date of the order. 7). Optimize Stage Four stages of optimization. They are Fast, Standard, Better and Super best. Longer calculation time makes better optimization. 8). Optimize Time Longer calculation makes satisfied optimization. It also connects with computer. Input the longe