世纪网通CNG系列常用配置.doc

世纪网通CNG系列常用配置基本参数设置:Login:rootPassword:centnetCentnet Cos [Software Version V03.01.r4.330 For CNG300 4FXS]Copyright (C) By 1999-2004 Centnet Technologies Co..Ltd All rights reserved.CentnetconPlease input the Password:(密码为空)Centnet/Confsup(超级管理员登陆)Please input the Password:(密码为szcentnet)Centnet/Confe0 (设置10M端口)Centnet/Conf/E0ip ***.***.***.*** 255.255.255.*** (设置IP地址和子网掩码)Centnet/Conf/E0quitCentnet/Confroute add def ***.***.***.*** (设置路由地址或网关地址)Centnet/Confwr (写入FLASH闪存)Centnet/Confh323Centnet/Conf/H323gk ***.***.***.*** (设置gkip)Centnet/Conf/H323h323id ******** (设置h323id)Centnet/Conf/H323quCentnet/ConfwrCentnet/Confdia t (设置拨号规则)Centnet/Conf/Dial TquCentnet/ConfwrCentnet/Conflin (设置各端口参数)Centnet/Conf/LineALLpre del t (删除被叫号码)Centnet/Conf/LineALLpre add ******(加入被叫号码)Centnet/Conf/LineALLnum ****** (设置主叫号码)Centnet/Conf/LineALLter (设置为终端模式)Centnet/Conf/LineALLdis (打开来电显示)Centnet/Conf/LineALLquCentnet/Confwr恢复出厂设置命令：Centnet/Confsetdefault重起网关命令:Centnet/Confreboot用E穿模式注册网守：如果已经用GK注册网守,先去除GK命令,Centnet/Conf/H323no gkCentnet/Confeasy ***.***.***.***如果注册平台需要E.164值Centnet/Conf/H323alias ******* (此处为主叫号码的值)免区号设置():Centnet/Confdia 0tCentnet/Conf/Dial 0TquCentnet/Confdia tCentnet/Conf/Dial Tpre +010Centnet/Conf/Dial TquCentnet/Confwr网关内部互打：1.先给每个端口设置号码Centnet/ConflinCentnet/Conf/LineAllpre del t (出厂值每个端口被叫号码都为T,如果存在一定要删除,如果已经删除过,这两步可以省略)Centnet/Conflin 0Centnet/Conf/Line0pre add 99000Centnet/Conf/Line0quCentnet/Conflin 1Centnet/Conf/Line1pre add 99001Centnet/Conf/Line1quCentnet/Conflin 2Centnet/Conf/Line2pre add 99002Centnet/Conf/Line2quCentnet/Conflin 3Centnet/Conf/Line3pre add 99003Centnet/Conf/Line3quCentnet/Confwr2.加映射本地的拨号规则Centnet/Confdia 99tCentnet/Conf/Dial 99Tmap 127.0.0.1Centnet/Conf/Dial 99TquCentnet/Confwr配合多路计费器使用，打开反极信号Centnet/Conf/LineAllinvertcheck设置PPPOE拨号连网Centnet/Conf/E0pppoe 帐号 密码打开/关闭路由功能Centnet/Conf/E0/Natstart/stop修改声音的增益问题：回音调制1.如果本地听到对方声音小 Centnet/Conf/LineAlliv d **