合成正交相位解调FTIR光谱仪仿真模型与性能研究.pdfVIP

第36 卷 第10 期 红 外 技 术 Vol.36 No.10 2014 年10 月 Infrared Technology Oct. 2014 合成正交相位解调 FTIR 光谱仪仿真模型与性能研究 谢运涛，张玉钧，程玉宝，邵 立，李宏斌，张 恺 （电子工程学院脉冲功率激光技术国家重点实验室，安徽合肥 230037 ） 摘要：利用光程差变化信息对红外干涉图进行非线性校正可以有效降低干涉仪动镜非匀速运动对傅里 叶变换红外光谱仪性能的影响。在合成正交相位解调的光程差信息反演方法基础上，建立了基于该方 法的红外干涉图非线性校正FTIR 光谱仪仿真模型。对该模型的性能参数进行了仿真分析，仿真结果 表明了合成正交相位解调方法的有效性。 关键字：合成正交相位解调；光程差非线性；FTIR 光谱仪 中图分类号：O438.2 ；TP274＋.2 文献标识码：A 文章编号：1001-8891(2014)10-0787-04 FTIR Spectrometer Model Based on Synthetic Quadrature Phase Detector/Demodulator and Its Performance Study XIE Yun-tao ，ZHANG Yu-jun ，CHENG Yu-bao，SHAO Li，LI Hong-bin ，ZHANG Kai (State Key Laboratory of Power Laser Technology, Electronic Engineering Institute, HeFei 230037, China) Abstract ：The optical path difference information used in the correction of the non-linear sampled infrared interferogram can effectively deduce the influence on the spectroscopy caused by the moving mirror of the interferometer. An optical path difference information getting method based on synthetic quadrature phase detector/demodulator was introduced and a FTIR spectrometer model based on this method was built. The optical path difference information getting method and the FTIR spectrometer system based on this method were also simulated. Experimental results show the effectiveness of this method. Key words ：synthetic quadrature phase detector/demodulator，non-linearity of the optical difference，FTIR spectrometer model 方法在硬件上可减少探测器和采集卡的使用，有利于 0   引言 实现光谱仪的便携式。本文对上述方法进行了深入研 傅里叶变换红外光谱技术在军事、科研、工业等 究，通过建立基于合成正交相位解调的FTIR 光谱仪 领域的广泛应用[1-2]，要求光谱仪数据具备通用、可移 仿真系统，对影响该模型的性能参数进行了仿真分 植性。傅里叶变换红外光谱仪输