MINITAB试题.docVIP

Homework 4 6-18(a) Figure 1 According to Figure 1, Alpha=0.10, A, D and AD seem significant. Figure 2 According to Figure 2 and Figure 3, we can know that the main effects and interaction effect plots indicate that effect AD appears larger than others. Figure 3 (b) Analysis of Variance for Etch Rate, using Adjusted SS for Tests Source DF Seq SS Adj SS Adj MS F P A 1 41311 41311 41311 23.77 0.000 D 1 374850 374850 374850 215.66 0.000 A*D 1 94403 94403 94403 54.31 0.000 Error 12 20858 20858 1738 Total 15 531421 S = 41.6911 R-Sq = 96.08% R-Sq(adj) = 95.09% (c) Estimated Regression Coefficients for Etch Rate Term Coef SE Coef T P Constant 776.06 10.42 74.458 0.000 A -50.81 10.42 -4.875 0.000 D 153.06 10.42 14.685 0.000 A*D -76.81 10.42 -7.370 0.000 S = 41.69 R-Sq = 96.1% R-Sq(adj) = 95.1% So we can get: Etch Rate = 776.06 – 50.81A +153.06D –76.81AD. (d) Figure 4 The NPP above (Figure 4) shows an approximately linear trend thus validating our assumption. The analysis of variance assumptions are satisfied. Figure 5 According to Figure 5，we can know that the regression model is adequate. From above，we can neglect the influence of the two elements of B and C. So leave two elements A and D. Means repeat 22 = 4。Run Num A Run Order A D Etch Rate 1 13 -1 -1 550 2 8 1 -1 669 3 1 -1 -1 1073 4 14 1 -1 749 5 12 -1 -1 604 6 9 1 -1 650 7 5 -1 -1 1052 8 10 1 -1 868 9 4 -1 1 633 10 15 1 1 642 11 11 -1 1 1075 12 2 1 1 860 13 16 -1 1 601 14 3 1 1 635 15 7 -1 1 1063 16 6 1 1 729 Factorial Fit: Etch Rate versus A, D Estimated Effects and Coefficients for Etch Rate (coded units) Term Effect Coef SE Coef T P Constant 778.31 51.27 15.18 0.000 A -106.12 -53.06 51.27 -1.03 0.321 D 2.87 1.44 51.27 0.