单片机多机多点温控系统从机模块.docVIP

PAGE \* MERGEFORMAT12 //DS从机程序 #include reg52.h #include intrins.h #define uchar unsigned char #define uint unsigned int #define SLAVE 0x01 #define BN 6 sbit LCD_RS = P2^5; /*定义LCD控制端口*/ sbit LCD_RW = P2^6; sbit LCD_EN = P2^7; sbit DS1=P1^0; sbit DS2=P1^1; sbit key3=P3^5; sbit tem=P3^3; sbit win=P3^4; sbit key1=P3^6; sbit key2=P3^7; uint temp1,temp2,tempH,tempL; // variable of temperature uchar flag1,aa,we; uchar A1,A2,A3,A4,B1,B2,B3,B4; // sign of the result positive or negative uchar dis1[16]={76,45,84,0,0,.,0,32,32,72,45,84,0,0,.,0}; uchar dis2[16]={48,49,32,0,0,.,0,32,32,48,50,32,0,0,.,0}; uchar code tab[] = {0,1,2,3,4,5,6,7,8,9}; uchar trbuf[6]; bit tready; bit rready; void str(void); void sre(void); void delay(int ms) { int i; while(ms--) { for(i = 0; i 250; i++) { _nop_(); _nop_(); _nop_(); _nop_(); } } } /*******************************************************************/ /* */ /*检查LCD忙状态 */ /*lcd_busy为1时，忙，等待。lcd-busy为0时,闲，可写指令与数据。 */ /* */ /*******************************************************************/ bit lcd_busy() { bit result; LCD_RS = 0; LCD_RW = 1; LCD_EN = 1; _nop_(); _nop_(); _nop_(); _nop_(); result = (bit)(P00x80); LCD_EN = 0; return result; } /*******************************************************************/ /* */ /*写指令数据到LCD */ /*RS=L，RW=L，E=高脉冲，D0-D7=指令码。 */ /* */ /*******************************************************************/ void lcd_wcmd(uchar cmd) {