In situ composite coating of titania–hydroxyapatite on titanium substrate by.pdfVIP

Materials Science and Engineering B 176 (2011) 1213–1221 Contents lists available at ScienceDirect Materials Science and Engineering B j o u r n a l h o m e p ag e: w w w. elsev /locate/mseb In situ composite coating of titania–hydroxyapatite on titanium substrate by micro-arc oxidation coupled with electrophoretic deposition processing Yu Bai a , Kyoung-A. Kim b , Il Song Park a,∗ , Sook Jeong Lee c , Tae Sung Bae a , Min Ho Lee a,∗ a Department of Dental Biomaterials, School of Dentistry and Institute of Oral Bioscience, Brain Korea 21 Project, Chonbuk National University,Jeonju 561-756, Republic of Korea b Department of Oral and Maxillofacial Radiology, School of Dentistry and Institute of Oral Bio Science, Chonbuk National University,Jeonju 561-756, Republic of Korea c Neural Injury Research Lab, Department of Neurology, Asan life Science Institute, University, of Ulsan, College of Medicine, Seoul 138-736, Republic of Korea a r t i c l e i n f o a b s t r a c t Article history: In situ composite coating of hydroxyapatite (HA)/TiO2 were produced on titanium (Ti) substrate by Received 20 November 2010 micro-arc oxidation coupled with electrophoretic deposition (MAOEPD) technique with different con- Received in revised form 14 June 2011 centrations of HA particles in the 0.2 M NaOH electrolyte solution. The surface morphology and chemical Accepted 15 June 2011 composition of the hybrid coating were effected by HA concentration. The amount of HA particles incor- Available online 1 July 2011