flac3d之Interface.pdfVIP

INTERFACES 3 - 1 3 INTERFACES 3.1 General Comments There are several instances in geomechanics in which it is desirable to represent planes on which sliding or separation can occur — for example: 1. joint, fault or bedding planes in a geologic medium; 2. an interface between a foundation and the soil; 3. a contact plane between a bin or chute and the material that it contains; 4. a contact between two colliding objects; and 5. a planar “barrier” in space, which represents a fixed, non-deformable boundary at an arbitrary position and orientation. FLAC 3D provides interfaces that are characterized by Coulomb sliding and/or tensile and shear bonding. Interfaces have the properties of friction, cohesion, dilation, normal and shear stiffnesses, tensile and shear bond strength. Although there is no restriction on the number of interfaces or the complexity of their intersections, it is generally not reasonable to model more than a few simple interfaces with FLAC 3D because it is awkward to specify complicated interface geometry. The program 3DEC (Itasca 1998) is specifically designed to model many interacting bodies in three dimensions; it should be used instead of FLAC 3D for the more complicated interface problems. Interfaces may also be used to join regions that have different zone sizes. In general, the ATTACH command should be used to join grids together. However, in some circumstances it may be more convenient to use an interface for this purpose. In this case, the interface is prevented from sliding or opening because it does not correspond to any physical entity. FLAC 3D Version 2.1 3 - 2 Theory and Background 3.2 Formulation FLA