OP-100R型光学指纹头技术说明书Specifications-TIE2ECommunity.PDFVIP

OP-100R 型光学指纹头技术说明书 Specifications of OP-100R optical fingerprint sensor 感谢您选用图安信息技术制造的OP-100R 型光学指纹采集器。OP-100R 指纹采集器具 有成像面积大，一致性好等优点，且成本低廉；适用于活体指纹的按压采集。 Thank you for choosing TOOAN OP-100R optical fingerprint sensor. OP-100R fingerprint sensor has the advantages of big image-scan area, good consistency and low cost. It is suitable for acquiring live pressing fingerprints. 1. 技术参数 1. Technical specifications 1) 外形图（见图一）； 1)An overview picture (Figure 1); 2) 安装尺寸（见图二）； 2) Dimensions (Figure 2); 3) 安装方式：可垂直或水平安装； 3) Installations: can be installed vertically or horizontally. 4) 光学畸变：梯形畸变； 4) Optical distortion: Trapezoidal distortion; 5) 分辨率：最小400DPI，最大600DPI； 5 ）Resolution (DPI): Minimum 400DPI, and maximum 600DPI; 6) 成像面积：可用图像面积为14.5mm ×18mm ； 6) Imaging area: effective image area is 14.5mm × 18mm; 7) PDF 文档HV7131R (见附录) 。 7) PDF documents HV7131R (see appendix). 图一(Figure 1) 图二(Figure 2) 2. 使用说明 2. User’s guide 2.1 连接 2.1 Connection 2.1.1 连接线类型 2.1.1 Types of connecting cables FPC 连接电缆，脚间距1.0mm，有同侧和异侧两种使用模式，需在定制时声明。 The FPC connecting cable has 1.0mm pin pitch. It can be mounted on the same-side of the cable (the exposed connectors on both ends of the cable) or on flipped side of the cable; customer can specify this option when ordering them. OP-100R-R ：异侧电缆 OP-100R-R: Same side cable. OP-100R：同侧电缆 (exposed connectors are on the side of the cable) OP-100R：Flip side cable (exposed connectors are on different sides of the cable) 2.1.2 连接线定义 （见图三） 2. 1.2 Definition of connecting cable (Figure 3) Pin 1 of OP-100R Pin 1 of OP-100R-R 图三 （Figure 3 ） 管脚定义如下 Definition of pins 1～8：D0~D7 9 ：SDA