采矿工程鸡西矿业集团东山煤矿2.4Mta新井设计参考.docVIP

摘 要 本设计新井为鸡西矿业集团东山煤矿2.4Mt/a的新井设计。共有5层设计可采煤层。分别是6#A、6#B、23#、34#和45# 。平均总厚度为12.8 m，煤的工业品牌号为1/3焦煤。设计井田的可采储量为187.6Mt，服务年限为56a,划分两个水平开采。 本设计矿井采用双立井的开拓方式，集中大巷及采区石门的大巷布置方式。共划分10个采区，其中首采区为2个，投产工作面2个。大巷运输采用10t架线式电机车牵引5t底卸式矿车运输，采用的采煤方法为走向长壁采煤法，采煤工艺为综合机械化采煤工艺。顶板处理方法为全部跨落法。年工作日为330d，采用“三、八”式工作制，工作面长为175m，每刀进度为0.8m，每日割8刀。主井采用多绳摩擦箕斗提升，副井采用罐笼提升。 由于本人知识有限，缺乏一定的现场经验。因此，本设计中难免会出现一些问题，请各位专家老师不吝指正。 关键词: 水平 分组集中 走向长壁 全套图纸，加 Abstract The task of this design is to construct a 2.4million tons new shaft for Shuangyashan Ming Administration.This mine has five minable Coal Seam.They are 6#A、6#B、23#、34#and 45#.It’s average thickness is 12.8 meters, types of coal seam is 1/3 coking coal. Designed field of minable capacity is 187 million tons. It can adapt for 56years, and is divided into two level. The mine shaft is applied to double indined shaft development method; Layout of gathing gallergand mining district eross heading; This level is divided into 10 mining districts and 2 worked faces. The big lane conveyance adopts 14 ton a line type electrical engineering cars lead 5 ton bottom unload type mineral cars transport, adopting of adopt coal method as the alignment the long wall adopt the coal method, adopting coal craft as to synthesize the mechanization adopt the coal craft.A plank handles method as to across to fall the method all.Ords 330 days every year. Adapt “three-eight” work situation, work face is 175 meters length of circle is 0.8meters, and times is 8 one day. The main well adoption many rope rub the box promotes, the vice- well adopts the rigid combination a cage promotes. Because my limit working ability and time. There must be lots of faults in this design. I plead with dirextors point them out and redify it, and I will accept it sincerely and humblely. Key words: Level the cent the set concentrates the cent the set concentrates 目 录 摘 要 I Abstract II 绪 论 1 第1章 井田概况及地质特征 2 1.1 井田概况 2 1.1.1交通位置 2 1.1.2地形地势 2 1.1.3气象及地震情况 2 1.1.4水源及电源 2 1.1.5煤田开发史 2 1.1.6工农业及原料供应状况