512控制LED洗墙灯.docVIP

INSTRUCTION OF LED WALL WASHER/ST-LHB01 This product is mainly used for decoration and highlight in building frame, garden, etc. It can work in independent mode and DMX mode, which can generate various color changing effects, such as flashing, fading, steady ,seven color jumping synchronously etc. DMX256 class gray degree dimmer，DMX（）。（）： ： L3*W152*H214mm Material of Shell： ： 3.9kgs±5% Rotary angle： 180° Input Voltage： 100V~256V AC ： 12V DC： IP65 ： -40℃~60°℃ Function Seven color jumping， ， Control mode Independent mode：； DMX mode： DMX512 signal control （3XLR） I E-1. Set up DMX address When the digital tube is not flashing， “A” key， one digital begin to flash，“A” key once again，，；“B” key，（）； *** 001~512 E-2. Adjustment and choice of function for independent mode After you press “A” key four times（；Pxy，correspond with three digital tubes respectively. You can press “B” key, the flashing digital tube adds eleven ( the value between 0 to 9）。“X”（1 to A）， “Y”（1 to 9） T： E-3. When you press button, please hold on about 10 second，then, you can exit the mode of adjustment function, the digital tube stop flashing and to memorize the adjusted parameters。 Using instruction F-1. Independent mode，you can adjust the preset functions of lighting by button on the back of lighting； F-2. DMX mode， DMX console to control the lighting，referring to the manual of the relevant console for attaining more information. F-3. Master/Slave function for independent mode，please choose at random some lighting as a master to attaining auto online function, the relative operation as below:： firstly, set the address of a master as 001，others are be set as a slave。For auto online mode, only one master, all effects depend on the effect of the master; F-4. DMX address， each lighting occupies three channels, that is red, green, blue， including the value of the initial channel， For example, Adrress 001 occupies th