毕业设计（论文）-纸箱胶带封箱机设计(含全套CAD图纸).doc

摘 要本次课题设计的，采用带驱动来进行封箱的方案，上下封箱、经济、快速、平稳。这种方案在技术上相当成熟的一种广泛应用于生产实际中。这次设计的，可以根据纸箱规格，手调节宽度及高度，可单机作业，也可与自动化包装流水线配套使用。工作时，当箱体进入工作空间后，箱体在下前进。当运行至刀架位置时，箱体将刀架和前胶带压轮压退位，而后胶带压轮在四杆机构的作用下与前胶带压轮保持同步运动而退位，并使前面的胶带与纸箱贴合并封箱。随着箱体前进，胶带不断地抽出封在箱体上。当箱体的后部离开刀架时，前胶带压轮由于四杆机构的作用与后胶带压轮的运动一致，而刀架受弹簧弹力作用，复位弹起，切断胶带。当箱体运动至离开后胶带压轮时，后胶带压轮也由于受可调弹簧回位作用而复位，使连在箱体上最后的胶带也贴在箱体上，完成后段封箱任务。该论文详细说明了本次封箱机设计的步骤及其依据。包括设计方案的选择、电机的选择、工作台部件的设计、顶式部件设计和刀片的设计。 关键词：封箱机；四杆机构；工作台部件；； Abstract Packaging machinery can greatly increase productivity, accelerate constantly updated products; reduce labor intensity and improve working conditions; energy saving materials, reduce costs, protect the environment; conducive to health is packaged products, improve product quality. This topic is designed carton tape sealing machine, using belt drive for sealing solutions, sealing up and down, economic, fast and smooth. This approach is technically quite mature one, it is widely used in actual production. The design of the carton tape sealing machine, carton size can be adjusted according to the manual width and height can be stand-alone operation, but also with supporting the use of automated packaging line. In operation, when the working space into the box, the box at the bottom of the forward conveying belt. When the tank runs to turret position, the knife box and press wheel pressure to step down before the tape, and then push the wheel under the influence of tape four-bar mechanism to keep pace with the movement of the wheel while pressing the tape before the abdication, and to the front of the tape Post merger with carton sealing. With forward box, tape withdrawn continuously sealed in the housing. When the rear of the cabinet to leave the knife, tape before pressing wheel due to the effect of the four-bar mechanism is consistent with the movement of the tape pressure roller, and knife by the elastic force of the spring, reset bouncing off the tape. When the box moves to the left pinch roller tape, the tape is also due to the press