EMC_NAS收集信息.docx

第一,运行NAS扩容检查脚本:登陆Control Station,采用SSH2,登陆Control Station,用户名:root密码:nasadmin上传upgrd-ckv10-85.tar.gz可采用FTP命令,或软件上传upgrd-ckv10-85.tar.gz文件至Control Station.解压上传的upgrd-ckv10-85.tar.gztarxvfz upgrd-ckv10-5.tar.gz运行检查脚本在解压的目录下运行检查脚本,./upgrd-ckv10-85.bin-v 1将脚本运行的过程记录下来.例:[root@hammer1 nasadmin]# ]# ./upgrd-ckv10-13.bin -v 1options vrun level is 1Tue Aug 28 07:58:28 EDT 2007 upgrd-ckv10-13########################################################### This script will log all activity to: /home/nasadmin/pre-upgrade.rpt# 59 days left before script expires # As a best practice you should verify this is the latest# version of the script.## NOTICE *** UUNET numbers are not available for use effective 12/31/2007.# Please check emc82645 for further instructions.##########################################################UPGRD-CK Version: 10-13 v 1 /nas Celerra: hammer1 Serial Number: FCNHH050500031 modem# 15003VERIFY MODE TURNED ON##########################################################Pre-upgrade checker run: Tue Aug 28 07:58:28 EDT 2007Enter the number that corresponds to the version of NAS code you will be upgrading to:1 NAS 5.4 2 NAS 5.53 NAS 5.3 or lower33. Enter the number which corresponds to the version of NAS code you are upgrading to.Then the test will continue.Installing 5.5 nas_check_upgradescripts .................... NOT INSChecking for old logcollector ............................... SKIPChecking for installed logcollector ......................... PassedChecking for installed configuration monitor ................ PassedCleanup logcollector and connectivity tar files ............. SKIPChecking minimum NAS code version ........................... PassedCheck /nbsnas is mounted ................................... PassedCheck /nas/dos is mounted ................................... PassedCheck /nas is mounted ....................................... PassedCheck /nas/var is mounted ................................... PassedCheck NAS Services are runn