Z3040-H摇臂钻床主轴的进给传动设计文档.docVIP

本 科 毕 业 设 计 (论 文) 有全套CAD图纸，有需要咨询Q6 9 0 7 5 2 7 8 6 Z3040-H摇臂钻床主轴的进给传动设计 The Feed Drive Design of the Z3040-H Radial Drilling Machine’s Spindle 学 院： 机械工程学院 专业班级： 机械设计制造及其自动化 学生姓名： 学 号： 指导教师： 2015 年 5 月 毕业设计（论文）中文摘要 摘 要：关键词：；；； 毕业设计（论文）外文摘要 The eed Drive Design of the Z3040-H Radial Drilling Machine’s Spindle Abstract: For this radial drilling machine, the paper is mainly composed of the feed transmission mechanism, the safety device, reversing mechanism, hydraulic devices, etc. To realize feed movement, the special transmission is adopted in reversing mechanism, such as worm mechanism, and rack mechanism. IF the worm shaft drives, worm gear will drive, and the direction of motion will change from vertical direction to horizontal direction; Then, through the gear rotation, rack will move, the direction of motion will change to horizontal direction, which can promote the spindle lifting, and reach the goal of feed movement. Feed transmission mechanism is the focus of the design, by designing the feed rate series and the transmission ratio, the feed rate classification transformation is realized. Hydraulic device uses differential cylinders, when the upper or lower chamber of a cylinder is filling, slip gears will move, realizing different meshing, and then change the amount of feed. For the safety device, it uses a steel safety ball clutch. In this design, the safety device is necessary, when the machine moves, if the feed force is so large that the machine cannot withstand, the safety device will work, and the feed movement will stop. Keywords: radial drilling machine; feed drive; reversing mechanism; safety device  目 录 1 绪论………………………………………………………………………………1 1.1 研究的意义……………………………………………………………………1 1.2 摇臂钻床在国内的现状………………………………………………………1 1.3 摇臂钻床的发展趋势…………………………………………………………1 1.4 设计目的………………………………………………………………………1 1.5 设计内容………………………………………………