螺母盒零件冲压工艺与冲模设计[全套CAD图纸].pdf

螺母盒零件冲压工艺与冲模设计 摘要：冲压生产靠模具与设备完成加工过程，所以它的生产率高，而且由于 操作简便，也便于实现机械化和自动化。 冲压产品的尺寸精度是由模具保证的，所以质量稳定，一般不需再经过机械加工 便可使用。 冲压加工一般不需要加热毛坯，也不像切割加工那样大量切削材料，所以它不但 节能，而且节约材料。冲压产品的表面质量较好，使用的原材料是冶金工厂大量生产 的轧制板料或带料，在冲压过程中材料表面不受破坏。 因此，冲压工艺是一种产品质量较好而且成本低的加工工艺。用它生产的产品一 般还具有重量轻且刚性好的特点。 关键词：冲压模具 冲压工艺 模具设计 1 Nut box parts stamping process and die design Abstrct: Blunt press to produce to be processed process by molding tool and equipments completion, so it of rate of production Gao, and because of operation simple, also easy to realization mechanization and automation. Blunt press the size accuracy of product is promise by the molding tool of, so quality stable, generally doing not need to through machine process again then can use. Blunt press to process generally don't need to heat semi- finished product, also be unlike to incise to process to so and in great quantities slice to pare material, so it not only economizes on energy, but also economize material.Blunt press the surface quality of product better, the original material of usage is a metallurgy factory mass production of the Ya system plank anticipate or take to anticipate and the material surface is free from breakage in bluntly ran over the distance. Therefore, it ising blunt to press a craft be a kind of product quality better and the cost lowly process a craft.Use the product that it produce generally still has the weight light and rigid and good characteristics. Keywords: Stamping die; Stamping process ；Mould design. 2 目录 前 言 1 绪论 2 1冲裁件的工艺分析 5 1.1本次设计冲压工件 5 1.2工件结构形状 6 1.3工件尺寸精度 6 1.4工件展开长度计算 7 2冲裁工艺方案的确定 8