A Boater’s Guide To AC Electrical Systems - Catalina 30.pdf

MARINCO – FAQS (FREQUENTLY ASKED QUESTIONS) Where can I obtain marine electrical products Contact your local Marine Dealer or Distributor, or check our Dealer Locator on our website, , to find your nearest Marinco supplier. How do you clean shore power cords If your basic soap and water doesn’t do the job, there are cord cleaners such as the Star brite™ brand available through most marine retailers. Acetone works best for those really stubborn scuff marks. What is the difference between 50 amp 125 volt and 50 amp 125/250 volt The blade configurations are different. In other words, one system may not be used with the other. 50 amp 125 volt is a 3 wire system (1 hot wire, 1 neutral, 1 ground). 50 amp 125/250 volt is a 4 wire system (2 hot wires, 1 neutral, 1 ground). Note: Each device has 3 blades. The 4 wire devices are grounded on ’ the side. A Boater s Warning: never alter a plug to make it mate with another. If two devices do not fit together, there is an important reason. Guide To AC I think I need an adapter to go from 30 amp to 50 amp….can you help me Please refer to our adapter chart on pages 13 – 15. More information is avail- able on our website, . Electrical What if my shore power device was immersed in saltwater The device should be rinsed with fresh water, and allowed to dry. Then, it should be sprayed with a moisture displacement product/light lubricant. Systems Where can I get detailed installation instructions for inlets and other electrical connecti