JV5使用菜单说明 ch.pdfVIP

使用说明 Setting 内的功能菜单 菜单中包含以下的功能 标 * 为缺省值 SET UP 功能 Function name Sub function Setting value Function MEDIA COMP. (p. 3-31) -255 to 255 进纸步经校正 MediaFeed FEED METHOD DIRECT, NORMAL 设定检测进纸步经的方式。 SETUP (p. 6-5) SPEED SWITCHING 200% to 10% 设定进纸步经率。 MOVEMENT TEST 127 - 50000 设定打印前先预测纸长度。 HEATER SET TEMP. Pre-heater OFF, 20 to 60 °C 设定加热条件。 (p. 3-20) (OFF, 68 to 140 °F) (p. 6-28) Print heater OFF, 20 to 60 °C (OFF, 68 to 140 °F) After-heater OFF, 20 to 70 °C (OFF, 68 to 158 °F) SET TIME STANDBY (NONE, 0- 90 min / In steps of 10 minutes) OFF TIME (NONE, 0 - 90 min / In steps of 10 minutes) PRINT MODE FINE quality STD., FINE, FAST 设定打印的精度和打印的方式 (p. 6-6) DRAFT quality STD., FINE, FAST SCAN DIRECTION Uni-D Bi-D LOGICAL SEEK ON, OFF INK LAYERS (p. 6-8) 1 to 9 设定重复打印的次数。 DRYING TIME SCAN 0.0 to 19.9 sec. 设定等待墨水干燥的等待时间。 (p. 6-8) D raw .EN D 0 to 999 sec. AUTO CUT (p. 6-9) ON,