温挤压微成形系统及其数值模拟研究-材料工程.pdfVIP

47 Investigation into the System and Numerical Simulation of Warm Microextrusion ,, ,, , , ( , 212013) W NG Yun, SUN R-i wen,XU Zhen-ying, D I Ya-chun, ZH NG Kai,YU N Guo-ding,C I Lan (School of Mechanical Engineering College,Jiangsu University, Zhenjiang 212013,Jiangsu, China) : / 0, ,, , B QUS/ Explicit , 210e , , : ; ; ; + : TG375 1 4 ;TG376 : : 1001-4381(2008) 04-0047-04 Abstract: One of the main occurring problems in miniaturization of part size is size effects, which de- manding new requirements especially on microforming theory,apparatus and process etc.Warm micro- extrusion process is proposed in view of micro extrusion in cold and hot forming insufficiency. T hen, the self-designed warm microextrusion system is presented in the review of the state of art in micro- forming apparatus,and its principle is carried on the elaboration.In order to explore theflowing behav- ior of workpiece in the microextruding cylinder, B QUS/ Explicit module is utilized to carry on the numerical simulation for warm microextrusion,the stress distribution and metal flowing behavior un- der different friction conditions in the warm extruding process at 210 e are analyzed. From the re- sults,we can obtain the influence of the different process parameters on warm microextrusion and the corresponding microforming laws,which offers the scientific theoretical foundation on its mould opt-i mization design. Key words:warm microextrusion; size effects; friction;numerical simulation , , ) , , LIG LIG , ,