伺服电机技术 车用电机智能化 编程逻辑与硬件集成.docVIP

A comparative study on the spindle system equipped with synchronous and induction servo motors for heavy duty milling with highly stable torque control In order to create a higher torque spindle system for productive milling operations, rotational speed stability against the torque disturbance has been studied with respect to the spindle mechanical design parameters, actuator types and spindle control algorithms. The study showed a remarkable difference in the spindle rotational speed stability against torque disturbance between a spindle system equipped with an induction servo motor and a permanent magnet synchronous servo motor. The results of this study have been obtained by theoretical analysis, numerical simulation and physical experiments, and the experimental study showed that the hybrid actuation spindle achieves longer tool life. Mechatronics and control of a long-range nanometer positioning servomechanism?? Since the manufacturing accuracy of semiconductor and biochemical products is increased to nanometer level gradually, the development of long-range positioning servomechanism has become a hot research topic. The piezoelectric actuator is widely chosen to design precise positioning system for achieving the sub-micro or nano-position. However, their motion range is only 100?μm. Here, a long-range nanometer positioning servo system with AC servo motor and ball screw mechanism is built for the precision manufacturing purpose. It needs a special design control algorithm to obtain quick transient response and precise steady state accuracy. A new model-free fuzzy controller is designed to control this low-cost motion stage for achieving nanometer step response positioning. It has a novel gain auto-tuning strategy in response to the transient or steady state responses requirement. The experimental results show that this approach can reach more than 30?cm stroke and the step response error is less than 60?nm. MACCEPA, the mechanically adjustable compliance and c