侧钻井地质设计及开发工艺配套技术研究-胜利油田现河采油厂-王史文_精品.pptVIP

* Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture illustrating a season in your country. * Insert a picture of an animal and or plant found in your country. * Insert a picture of an animal and or plant found in your country. * Insert a picture of an animal and or plant found in your country. * Insert a picture of an animal and or plant found in your country. * Insert a picture of an animal and or plant found in your country. * Insert a picture of an animal and or plant found in your country. 汇 报 提 纲 一、概述 二、侧钻井地质设计 三、侧钻井完井及采油配套技术 四、成果及效益 * 1、95mm套管的研发 2、68型射孔器的研制 3、投产设计优化 1、侧钻井改层、修套系列技术 2、特种小油管研发 完井工艺研究 采油工艺配套研究 三、侧钻井开发配套技术 * （一）侧钻井完井工艺 总结前两个阶段套管完井存在的缺陷，立足于51/2套管内开窗侧钻这一先决条件和现时需求，研制出一种新型33/4(φ95mm)小套管。 1：研发Φ 95mm新型小套管 第一阶段：1991年~1998年，采用 4”（?102mm）套管完井阶段； 第二阶段：1999年~2003年 采用31/2”（?89mm）油管作套管完井阶段； 第三阶段：2003年~至今 采用33/4”(φ95mm)套管完井阶段。 * 套管的内径 按照万仁溥主编《采油工程手册》中套管设计节点分析理论，运用系统工程的方法，确定新型套管内径82.3mm 、壁厚6.5mm，套管的外径95.3mm，接箍外径为107mm，并配套标准的扶正器 套管接箍外径尺寸 套管壁厚及外径的确定 * 95mm套管参数 管体外径：95.25mm; 壁厚：6.5mm; 长度：9～11m; 接箍外径：107mm；接箍长度：146 mm； 连接螺纹： 31/2” 特种外加厚油管扣。 委托石油大学石油机械工程实验室检验了耐压极限和螺纹承载能力实验，完全满足现场需求。 1.管体曲服压力为160MPa 2.丝扣抗滑扣载荷为950KN 95mm套管性能指标 * Φ95mm专用套管的优点 φ95mm专用套管自2003年投入现场后，在现河应用近200井次，目前已推广至多个油田，成为侧钻井专用套管。 1、较4 油管做套管减少固井难度，提高固井质量，减少侧钻扩眼程序。 2、较3 油管内通径增