GM-1796(GP-10)精选.pdfVIP

GENERAL MOTORS SUPPLIER DEVELOPMENT GENERAL PROCEDURE EVALUATION AND ACCREDITATION OF SUPPLIER TEST FACILITIES GP 10 EVALUATION AND ACCREDITATION OF TESTING FACILITIES USED BY SUPPLIER OF MATERIALS TO GENERAL MOTORS PREFACE TO GP-10 General Motors expects suppliers to have the material The accompanying GP-10 General Procedure, GM and performance characteristics of its products 1796, General Motors procedure for “Evaluation and validated by an accredited materials test facility. Accreditation of Supplier Test Facilities”, provides uniform requirements for a supplier to obtain An accredited materials test facility is one which has materials test facility accreditation as required in been accredited to do the materials and performance paragraph 3.2.2 “Laboratory and Test Requirements” evaluations specified by the purchaser on part of General Motors Supplier Development General drawings and other contractual documents, using Procedure GP-3, GM 1390, “Supplier Submission of approved test methods and procedures on properly Material for Production Approval.” calibrated equipment by qualified personnel. The materials test facility may be part of the supplier’s in- Each General Motors supplier is requested to house operations, an independent laboratory or both. complete the Test Facility Q