局所火炎试验条件-unece.PPTVIP

Comparison of Permeation Standards Among HySAFE, SAE and Japanese Regulations and Proposal to GTR 　 JASIC -SGS-9-069 SGS-9-06 1)Comparison of Permeation Standards Among HySAFE, SAE and Japanese Regulations Current Japanese regulation: Prescribes that permeation rate for new containers be 5 Ncc/L/hr. As temperature, we set it at 15?C. Further, we reflected the opinions of container manufacturers and automakers and considered the actual performance of currently used containers. SAE: Prescribes that the allowable permeation amount of the vehicle be 150 Ncc/min. Considers an external temperature of 55?C taking EOL into account. Prescribes garage volumes according to the sizes of the vehicle. HySAFE: Prescribes that the allowable permeation rate of the container be 6 Ncc/L/hr. Considers an external temperature of 55?C taking EOL into account. Prescribes the sizes of tank and garage for three sizes of vehicles. Allowable Permeation Rate (Ncc/L/hr) [New at 15?C] Allowable Permeation Rate (Ncc/L/hr) [New at 55?C] Allowable Permeation Rate(Ncc/L/hr) [EOL at 55?C] Storage Volume (L) Allowable Permeation (Ncc/min) Ventilation rate (ac/hr) Garage Volume (m3) Maximum Hydrogen Concentration (%) Japanese regulations 5 - － 360 30 0.18 36.4 0.028 SAE 　 　 　 　 150 0.03 30.4 1 HySAFE (Large　Car） 6 28.2 56.4 249 232 0.03 46 1 HySAFE（Small Car） 6.8 31.96 63.92 149 157 0.03 31 1 HySAFE (Mini Car） 7.9 37.13 74.26 75 91 0.03 18 1 　Definition of permeation amount among HySAFE, SAE, and Japanese regulations [Purpose of Review] Since the definition of permeation amount varies among HySAFE, SAE, and Japanese regulations, it is difficult to clearly compare allowable permeation amount under these standards. The purpose of this review is to unify the definition and compare permeation amount among these standards. 2) Examination of Permeation Rate for Containers Under SAE Standard * Here we calculated the permeation rate for containers under SAE from permeation amount for vehicles (