专业英语全部复习资料123.docVIP

翻译 P58. The signal-processing block at the transmitter conditions the source for more efficient transmission. For example, in an analog system, the signal processor may be an analog low-pass filter that is used to restrict the bandwidth of m(t). In a hybrid system, the signal processor may be an analog-to-digital converter (ADC). This produces a “digital word” that represents samples of the analog input signal. In this case, the ADC in the signal processor is providing source coding of the input signal. In addition, the signal processor may also add parity bits to the digital word to provide channel coding so that error detection and correction can be used by the signal processor in the receiver to reduce or eliminate bit errors that are caused by noise in the channel. The signal at the output of the transmitter signal processor is a baseband signal because it has concentrated nearf =0. The transmitter carrier circuit converts the processed baseband signal into a frequency band that is appropriate for the transmission medium of the channel. For example, if the channel consists of a fiber optic cable, the carrier circuits convert the baseband input to light frequencies, and the transmitted signal s(t) is light. 1.random access memory（RAM） 2. International Telecommunications Union （ITU）3.pubiic telecommunicat/ons network（PTN）4. binary-coded number 5. negative-feedback amplifer 6. adaptive equalization 7 stored-program control(SPC) 8. quadrature amplitude modulation (QAM) 9. linear integrated circuit 10. common emitter circuit高保真度、带通信号、电磁感应、多径衰落、方框图、扩频系统、单边带、频率配置、电离层反射、差错控制码、 二 填空 P58. If the channel ___baseband signals, no carrier circuits are needed, and s(t) can be output of the processing circuit at the transmitter. Carrier circuits are needed when the transmission channel is __ in a band of frequencies around fc0. In this case, s(t) is said to be a ___ because it is designed to have frequencies located in a band about fc. For example, an ____ modulated