柱塞泵毕业设计简介.docVIP

A4F040斜盘式轴向柱塞泵的设计 摘要 液压泵是向液压系统提供一定流量和压力的油液的动力元件,它是每个液压系统中不可缺少的核心元件,合理的选择液压泵对于液压系统的能耗﹑提高系统的效率﹑降低噪声﹑改善工作性能和保证系统的可靠工作都十分重要 关键词：轴向柱塞泵 球面配流 柱塞 缸体 滑靴 Abstract Liquids pressing a pump is the motive component of oil liquid which presses system to provide certain discharge and pressure toward the liquid, it is each core component that the liquid presses the indispensability in the system, reasonable of choice liquids pressing a pump can consume a﹑exaltation the efficiency﹑of the system to lower a Zao voice﹑an improvement work function and assurance system for liquid pressing system of of dependable work all very important. The piston pump designed this time, which is part of high pressure and small displacement, has a pressure of 31.5MPa and displacement of 40ml/r. The swash plate axial piston pump,A4FO40,which is simple, has high press and is more lighter, is usually used in engineering machinery, mining machinery and walking machinery. After analysising the working principle and the advantages and disadvantages of front swash and back swash piston pump, this paper describes the moving conditions and stressing conditions of piston pump. In the parts of structure designing ,we mainly concentrated in the analyses and calculating of slipper ,piston ,sphere port plate . In order to deduce the undershoot and overshoot of flow, we adopt the structure of 9 piston as recommended. In addition ,the significant difference between this pump and the common others are that this pump adopts the sphere port plate and the lean placing piston, thus ,the sylinder block and port plate can match up each other compactly, and the pressure the piston bearde can improved. At the same time , the life of the pump can be extended. Keywords: axial piston pump sphere port plate piston cylinder block slipper 一、前言 液压传动技术从近代开始，在经过了半个多世纪的发展后，已经成为现代工业不可或缺的一部分。同时随着电子技术、计算机技术以及材料科学的发展，液压元件和系统在水平上已经有了很大的提高。液压泵是向液压系统提供一定流量和压力的油液的动力元件,它是每个液压系统中不可缺少的核心元件,合理的选择液压泵对于液压系统的能耗﹑提高系统的效率﹑降低噪声﹑改善工作性能和保证