az31镁合金棒材热轧有限元模拟与实验分析 word格式.docxVIP

Finite element simulation and experiment research on hot rolling of AZ31 magnesium alloy rodAbstractMagnesium alloy known as the 21st century green engineering material, has been gradually used in aerospace, automotive electronics, armament and other industries, has a broad application prospect. In this paper ， through the study of AZ31 magnesium alloy plasticity，looking for high-strength magnesium alloy rod rolling process suitable route.Hot-rolled magnesium alloy can be overcome at room temperature plastic deformation poor shortcomings, rolling magnesium alloy also make better organizational structure and material properties, but to develop and improve the production process route, but also requires a longer theoretical analysis and test cycle. Rolling through the traditional theory of experience, roughly the production process design, we design two different rolling systems, comparative advantages and disadvantages of the two programs, through the rolling process is simulated on the field distribution, the metal flow patterns and rolling force changes were analyzed to determine the better option, and the analysis and comparison of different temperatures to determine the main parameters of rolling and eventually develop a more appropriate process.After a three-roll mill Y-developed process route is completed by rolling test, complete AZ31 magnesium alloy bar from rolling to Ф85 Ф95, and to get a better surface quality of the rolled bar, air-cooled, after rolling bars slices on XJP-6A metallographic microscope microstructure results show after rolling bar has better mechanical properties.By studying this topic，magnesium alloy and rolling plastic deformation theory has morein-depth understanding of the use of DEFORM-3D to simulate the hot rolling process, analyzes the development of an appropriate process route through simulation, high-strength magnesium alloy rod The actual production of material significance.Keywords: Magnesium alloys, rolled, DEFORM-3D, numeric