城市给水泵站全变频变压变流量运行控制优化研究-市政工程专业论文 word格式.docxVIP

ABSTRACTWater pumping station is an important component of the water supply system, the power transformation from electric energy to mechanical energy is mainly completed in the unit.Now, the water pumping station in design and operation have a lot of problem such as the energy conservation consciousness is lacking, obsolete equipment and aging technology, the lower the level of automation, result in the waste of energy and have a great potential of energy conservation in water pumping station.Through referring the information about optimization of pump station in home and abroad, Analyzed and summarized the issues: optimization of pumping stations and water supply system optimization, The reconstruct of pumping station that has ben built for energy conservation and pump impeller cutting, The method of flow control in Pumping Stationand approach speed pumps, the characteristics of VVVF, The volume of pond in waterwork and other issues. This issues laid the foundation for the modeling of water pumping station running energy-saving control strategy , providing the theoretical reference and guidance for actual operation in water pumping station .Through access to relevant documentation sorted out a genetic algorithm process and the calculation of basic operations, summed up the calculation steps of the basic genetic algorithm solve the optimization model of the pumping station.Fecting water pumping station is design in the most disadvantaged situation and using fixed speed running operation. when Surface water level have a greater change in a year or in a day, fixed speed pumps operating units will be running in the low efficiency of the pumps in the most of the time, resulting in waste of energy.The energy-saving way of water supply pumping station is pumps group running in variable speed and constant speed with one or two VVVF equipment. Actual operation showed that the Energy conservation are not effective in this way. Energy conservationare not effective mainly ca