基于fpga的软件无线电上下变频技术的研究与设计-电子与通信工程专业论文 word格式.docxVIP

AbstractAs the maturing of the theory and application of software-defined radio, software-defined radio has been widespreadly concerned in various areas around the world, it also has been widely used in the field of mobile communications, and it has became a general direction of future development of communication technology as well. Software-defined radio has the characteristics of flexibility and openness.With the rapid development of the programmable logic device, FPGA (Field-Programmable Gate Array) has shown great advantages in performance, power consumption, cost and other aspects and becomes the current hot spots of electronic circuit design. Therefore, this paper does the design and research on the software radio up and down conversion technology which is based on FPGA.Firstly, this article studies software radio up and down conversion technology, and then completes the digital up/down conversion algorithm design and implementation which is based on the FPGA after doing relevant theoretical research. During the study of the digital up converter, the digital conversion program of using the combination of FPGA and AD9862 is proposed and completed. In the study of the digital down converter, the digital conversions each module, including numerically controlled oscillator, half-band filter and FIR filter has been analyzed and algorithmic designed respectively. It completes the circuit and multi-stage filter structure design of the digital down conversion and finishes the digital down conversion by the way of multi-stage filter. Finally, the GMSK signal modulation and demodulation is carried out with using the FPGA. It verifies the correctness of the design by laboratory-produced software radio experimental platform for system debugging. The design of completed programs not only solve the processing speed bottleneck problem of software radio digital up and down conversion, but also effectively satisfies the requirements of the expanding of software radio.Key