温度(T)控制器程序.docVIP

#include reg52.h #include intrins.h #define dm P0 #define uchar unsigned char #define uint unsigned int sbit DQ=P2^7; sbit w0=P2^0; sbit w1=P2^1; sbit w2=P2^2; sbit w3=P2^3; sbit beep=P1^7; sbit set=P2^6; sbit add=P2^4; sbit dec=P2^5; int temp1=0; uint h; uint temp; uchar r; uchar high=35,low=20; uchar sign; uchar q=0; uchar tt=0; uchar scale; //**************温度小数部分用查表法***********// uchar code ditab[16]={0x00,0x01,0x01,0x02,0x03,0x03,0x04,0x04,0x05,0x06,0x06,0x07,0x08,0x08,0x09,0x09};//小数断码表 uchar code table_dm[12]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90,0xFF,0xBF}; //共阴 LED 段码