Solutions made by Klingelnberg Spiral bevel gear tester Oerlikon T 60文档.pdfVIP

Solutions made by Klingelnberg Spiral bevel gear tester Oerlikon T 60 State of the art testing technology The T 60 is a CNC machine used for hard and soft tests of the operating behavior of spiral bevel gears and hypoid bevel gears. The machine has three linear axes used to adjust the gear set locating distances and the axis offset. As an option, the machine can be equipped with an adjusting shaft for adjusting the shaft angle, so that also bevel gear sets with a shaft angle which deviates from 90° can be checked. The T 60‘s main field of application is the fully automatic run test of bevel gear and hypoid sets via single flank testing and/or structure-borne noise measurement under series manufacturing conditions. The userfriendly software is designed for individual measuring procedure configura- tion, making it possible to perfectly adapt the test cycle to the respective production requirements. Optional supplementary tools, such as the speed opti- available periods for testing become shorter and shorter. mization, are designed to help the machine set-up man In order to meet this demand, the T 60 offers the possibil- with this task. Tolerances for concentricity and mounting ity of installing dual programs, which is a combination of position deviations, as well as for parameters of the a standard cycle with a minimum amount of inspection single flank test and the structure-borne noise test can be and an additional extended cycle. defined to monitor and control gear set quality. With this option both an inspection level of 100% and In addition, the basic dimension for assembly can be a short cycle time