Solving Load Flow Problems of Power System by Explicit Pseudo-Transient Continuation (E- psi;tc) Method文档.pdfVIP

Energy and Power Engineering, 2016, 8, 99-115 Published Online February 2016 in SciRes. /journal/epe /10.4236/epe.2016.82009 Solving Load Flow Problems of Power System by Explicit Pseudo-Transient Continuation (E-Ψtc) Method 1 2 Tianmin Han , Yuhuan Han 1 Electric Power Research Institute, Beijing, China 2 Hedge Fund of America, San Jose, USA Received 24 November 2015; accepted 23 February 2016; published 26 February 2016 Copyright © 2016 by authors and Scientific Research Publishing Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract This paper is a further study of two papers [1] and [2], which were related to Ill-Conditioned Load Flow Problems and were published by IEEE Trans. PAS. The authors of this paper have some dif- ferent opinions, for example, the 11-bus system is not an ill-conditioned system. In addition, a new approach to solve Load Flow Problems, E-Ψtc, is introduced. It is an explicit method; solving linear equations is not needed. It can handle very tough and very large systems. The advantage of this method has been fully proved by two examples. The authors give this new method a detailed de- scription of how to use it to solve Load Flow Problems and successfully apply it to the 43-bus and the 11-bus systems. The authors also propose a strategy to test the reliability, and by solving gra- dient equations, this new method can answer if the solution exists or not. Keywords Load Flow Problems of Power System, Ill-Conditioned System, Normal Newton Method, Optimal Multiplier Method, Brown Method, Explicit Pseudo-Transient Continuation (E-Ψtc), 11-Bus and 43-Bus Systems, Reliability, Gradient Equatio