多目标优化的汽车覆盖件顶盖冲压模具的设计论文[带图纸].docVIP

毕 业 论 文（设 计） 题目：多目标优化的汽车覆盖件的设计 ——汽车顶盖模具设计 （英文）：Mold Design of Automobile Covering Based on Multi-objective Optimization——Car Roof Die Design 院 别： 机电学院 专 业：机械设计制造及其自动化 姓 名： 学 号： 指导教师： 日 期： 2010年5月29日 多目标优化的汽车覆盖件的设计 ——汽车顶盖模具设计 摘要 本文以建模软件Pro/E和冲压仿真分析软件Dynaform为工具，以典型汽车覆盖件（车顶盖）为例，应用计算机对产品进行三维建模及仿真计算冲压模具工作过程，通过分析结果，验证模具设计是否合理，防止起皱、拉裂等不良现象。实践证明，采用冲压仿真分析软件DYNAFORM对汽车覆盖件成形过程进行模拟，并根据仿真结果进行冲压工艺规划和模具的设计，可以降低成本，缩短生产周期，提高模具的设计质量。主要讲述仿真分析技术在汽车覆盖件模具制造中的实际应用。探讨了虚拟制造技术在汽车模具制造中的重要性和优势，提出了虚拟制造技术在汽车模具开发领域的应用。在简单介绍了虚拟制造的原理及其组成部分后，对其在汽车覆盖件模具制造中的应用给出了详细说明，重点介绍了在汽车覆盖件模具制造中如何使用虚拟制造技术，给出了应用的一般流程，并对其中的关键技术和难点技术给予了详细说明。 关键词：冲压；仿真；Dynaform；覆盖件；模具设计 Mold Design of Automobile Covering Based on Multi-objective Optimization棗Car Roof Die Design日 ABSTRACT In this paper we use modeling software Pro/E and simulation software Dynaform as a tool, take the typical automobile cover (car roof) as an example, use the computer to model the product and simulate the stamping process，through result analysis, we confirm the mold is designed reasonably. Such design would prevent such bad phenomenon as wrinkle and fracture and so on. It has been proved, using the stamping simulation analysis software Dynaform to make the simulation of automobile cover forming process, and making the stamping process plan and the mold design according to the simulation results, can reduce the cost, shorten production cycle, enhance the mold design quality. In order to explain the Simulation Analysis Technologys application in automobile covering mould manufacturing, discusses the importance of the virtual manufacturing technology used in mould manufacturing, the application of virtual manufacturing technology was put forward in the field of auto mould development. After virtual manufacturing is simply introduced, a detailed explanation was given in the mould manufacturing application. Additionally, we