吊耳注塑模具结构设计与制造毕业设计推荐.docVIP

毕业设计（论文）报告 题 目 吊耳注塑模结构设计与制造 吊耳注塑模具结构设计与制造摘要：本文主要介绍的是吊耳注塑模具的设计方法。首先分析了吊耳制件的工艺特点，包括材料性能、成型特性与条件、结构工艺性等，并选择了成型设备。接着介绍了吊耳注塑模的模具结构，分型面的选择、型腔数目的确定及布置，重点介绍了浇注系统、点浇口、成型零件、合模导向机构、脱模机构、定距分型机构以及冷却系统的设计。然后选择标准模架和模具材料，并对注射机的工艺参数进行相关校核。最后对模具的工作原理进行阐述，以及在安装调试过程中可能出现的问题进行总结、分析，并给出了相应的解决方法。本文论述的吊耳注塑模具采用三板式结构，即浇注系统凝料和制件在不同的分型面脱出，采用一模两腔的型腔布置，最后利用滑块将制件推出。关键词：吊耳；点浇口；侧向分型与抽芯机构；定距分型机构Lug mold structure design and manufacturingAbstract：This paper mainly introduced in this paper is lifting lugs injection mold design method. First analysis of the lug drawing of process characteristics, including materials properties, forming characteristics and conditions, structure and technology, and choose the molding equipment. Then it introduces lug injection mold die structure, and points the selection of type, the determination of cavity number and layout, introduced the gating system, molding parts, molmerged steering mechanism, parting institutions, spacer parting institutions and the design of the cooling system. And then choose the standard formwork and mould material, and the injection machine of process parameters related respectively. The work principle of the die is expounded, and the installation process may be the problems summarized, analyzed, and some solutions are given。This paper discusses lifting lugs injection mould with three plate structure, namely gating system in different parts of the material and the parting surface emergence, use a module and two cavity cavity decorate, finally, using the slider parts will be launched。Keywords:Lug; Some gate; Side parting and core-pulling mechanism; Spacer parting institutions.目录TOC \o 1-3 \h \u HYPERLINK \l _Toc23356 前言 PAGEREF _Toc23356 1 HYPERLINK \l _Toc31937 1.选题的依据及意义 PAGEREF _Toc31937 1 HYPERLINK \l _Toc342 2.国内外研究现状及发展趋势 PAGEREF _Toc342 1 HYPERLINK \l _Toc21147 第一章 吊耳工艺性分析 PAGEREF _Toc21147 5 HYPERLINK \l _Toc12911 1.1塑件（吊耳）分析 PAGEREF _Toc12911 5 HYPERLINK \l _Toc1529 1.2塑件的结构及成型工艺分析 PAGEREF _Toc1529 5 HYPERLINK \