9260原理图设计注意点.pdfVIP

AT91SAM9260 Microcontroller Schematic Check List AT91 ARM 1. Introduction Thumb-based This application note is a schematic review check list for systems embedding the Atmel® ® ® ARM Thumb -based AT91SAM9260 microcontroller. Microcontrollers It gives requirements concerning the different pin connections that must be consid- ered before starting any new board design and describes the minimum hardware resources required to quickly develop an application with the AT91SAM9260. It does Application Note not consider PCB layout constraints. It also gives advice regarding low-power design constraints to minimize power consumption. This application note is not intended to be exhaustive. Its objective is to cover as many configurations of use as possible. The Check List table has a column reserved for reviewing designers to verify the line item has been checked. 6275C–ATARM–12-Mar-07 2. Associated Documentation Before going further into this application note, it is strongly recommended to check the latest documents for the AT91SAM9260 microcontroller on Atmel’s Web site. Table 2-1 gives the associated documentation needed to support full understanding of this appli- cation note. Table 2-1. Associated Documentation Information Document Title User Manual Electrical/Mechanical Characteristics