顶级太阳能资料Achieving_High_Efficiency_in_acosteffectiveway汇.pdfVIP

Achieving High Efficiency in a AAcchhiieevviinngg HHiigghh EEffffiicciieennccyy iinn aa Cost-Effective Way CCoosstt--EEffffeeccttiivvee WWaayy Yong Liu Outline OOuuttlliinnee • Introduction • Device Structure • Results and Discussion – Cell Characteristics – Volume production statistics • Conclusions 5/17/2010 2 Introduction IInnttrroodduuccttiioonn • Achieving high conversion efficiency for PV cells and modules at low cost is of vital importance to reach grid parity but it is also a great challenge • JA Solar has been striving to meet the challenge in developing high efficiency c-Si PV cells while keeping manufacturing cost down – Adopting new cell technology based on current conventional cell production platform – Recently announced 18.5% RD results – Currently in preparation to introduce into production 5/17/2010 3 Device Structure DDeevviiccee SSttrruuccttuurree • Selective emitter structure compatible with conventional industrial cell production line – p-type CZ-Si wafers – n-type Si ink/paste – Industrial size • 125-mm pseudo-squared • 180-m thick • 1.0-3.0 -cm bulk resistivity 5/17/2010 4 Cell Process CCeellll PPrroocceessss • Front surface of p-type c-Si wafer is patterned by screen printed Si ink • Formation of selective emitter is completed by one single diffusion step • All the rest are the same as standard cells n++ Ag n+ Absorber (p-type c-Si) BSF/back contact 5/17/2010