BW型通用型不锈钢金属软管.doc

BW型通用型不锈钢金属软管 BW-based general-purpose stainless steel metal hose Page36 BW型通用型不锈钢金属软管主要由波纹管、网套和接头（法兰或活接头）等部件组成。适用于管道工程系统中为补偿位移和安装偏差、吸收振动及降低噪声等所采用，根据工程需要可适当延长和缩短制造长度。由于软管的弹性体波纹管的材料是奥氏体不锈钢，因此具有最佳的柔软性和耐曲挠性，很容易吸收各种交变运动和载荷，抗疲劳性强、耐压高、耐腐蚀、耐高低温（-200℃-600℃），广泛用于航天、航空、船舶、化工、石油、电力、冶金、造纸、纺织、军工、建筑、医药、食品、交通运输等行业。当温度、介质变化大时，需考虑温度与压力的递减系数，除表中所列材料外，其他特殊铁系、镍系、合金钢的压力递减系数请接洽本公司。 BW-based general-purpose stainless steel metal hose is mainly consisted of bellows, net sheath and joint (flange or active joint) etc. It is used in the system of pipeline project for compensating displace-ment, installing distortion, vibration absorber as well as muffling, the length of which can be adjusted according to the need of the project. Since the corr-ugated soft pipe is made up of austenitic stainless steel, it has the best pliability and flexibility and is easy to absorb the distortion caused by movement and weight. It is widely used in the field of spacef-light, aviation, shipping, chemical industry, oil, electric power, metallurgy, paper making, textile, war industry, construction, medicine, food, traffic and transportation etc. When the temperature and medium changes greatly, the temperature and descend-ing coefficient of pressure should be taken into consideration. Apart from the material listed in the table, please contact us if you need the descending coefficient of pressure of other special material such as iron, nickel or alloy steel.  温度、材料、压力递减系数表 table of descending coefficient of pressure, temperature, material 材料 material SUS321 SUS316L SUS304 温度temperature -200-50 1.00 1.00 1.00 100 0.96 0.94 0.93 150 0.92 0.90 0.89 200 0.88 0.86 0.84 250 0.84 0.82 0.79 300 0.80 0.78 0.74 350 0.76 0.74 400 0.72 0.70 450 0.66 500 0.60 550 0.54 600 0.44 各种酸碱选材表 selecting table of all kinds of acid and alkali 温度temperature 30°C 接近沸点near boiling point 中间温度mid temperature 介质 medium 硝酸nitric acid SUS304 SUS304 SUS304L 硫酸sulfuric acid SUS316 Incoloy825 Incoloy825 亚硫酸sulfur