ROS PCC负载详细图文教程(新)23.pdf

ROS PCC 负载详细图文教程 （新）！ 虽然网上很多视频，但是貌似很多菜菜天天都在问如何负载平衡，下面做一个PCC 的负载教程。 以下环境是 ADSL 4 线负载均衡，线路数量不同的请自行修改脚本。 接口图示 开启DHCP，自己先给lan 网卡配置一个地址，例如192.168.0.1/24 NAT 伪装 Mangle 视图 下面是回程路由，只发一个接口的图，其他的自己添加，可加可不加 标记连接，路由 路由设置 4 线PCC 负载脚本 PCC 负载脚本 —–仅支持3.30 或以上脚本！ /ip firewall mangle add action=change-mss chain=forward comment=” disabled=no new-mss=1400 protocol=tcp tcp-flags=syn add action=mark-connection chain=input comment=” disabled=no in-interface=pppoe-out1 new-connection-mark=pppoe-out1_conn passthrough=yes add action=mark-connection chain=input comment=” disabled=no in-interface=pppoe-out2 new-connection-mark=pppoe-out2_conn passthrough=yes add action=mark-connection chain=input comment=” disabled=no in-interface=pppoe-out3 new-connection-mark=pppoe-out3_conn passthrough=yes add action=mark-connection chain=input comment=” disabled=no in-interface=pppoe-out4 new-connection-mark=pppoe-out4_conn passthrough=yes add action=mark-routing chain=output comment=” connection-mark=pppoe-out1_conn disabled=no new-routing-mark=to_pppoe-out1 passthrough=yes add action=mark-routing chain=output comment=” connection-mark=pppoe-out2_conn disabled=no new-routing-mark=to_pppoe-out2 passthrough=yes add action=mark-routing chain=output comment=” connection-mark=pppoe-out3_conn disabled=no new-routing-mark=to_pppoe-out3 passthrough=yes add action=mark-routing chain=output comment=” connection-mark=pppoe-out4_conn disabled=no new-routing-mark=to_pppoe-out4 passthrough=yes add action=mark-connection chain=prerouting comment=” disabled=no dst-address-type=!local new-connection-mark=pppoe-out1_conn passthrough=yes per-connection-classifier=both-addresses:4/0 src-address=192.168.0.0/24 add action=mark-connection chain=prerouting comment=” disabled=no dst-address-type=!local new-connection-mark=pppoe-out2_conn passthrough=yes per-connection-classifier=both-addresses:4/1 src-address=192.168.0.0/24 add action=mark-connection chain=prerouting comment=” disabled=no dst-