座椅脚垫注塑模具设计--毕业设计(论文)说明书汇.docxVIP

编号： 　毕业设计(论文)说明书题 目： 座椅脚垫注塑模具设计 学 院： 专 业： 机械设计制造及其自动化学生姓名： 学 号： 指导教师： 职 称： 题目类型：理论研究 实验研究 工程设计 工程技术研究 软件开发年xx月xx日摘 要本论文是关于座椅脚垫注塑模具的设计制造及分析。通过对脚垫要实现的功能分析，要求塑件具有高强度、耐冲击、耐磨等性能，综合考虑选择ABS作为该塑件的材料。首先通过反求工程得到塑件的形状参数，利用软件对塑件的外型实体进行三维建模，将其格式存为STEP格式方便保存三维模型数据,利用SolidWorks2015重新分析并创建出分型面，通过分割形成模具的成型零部件。然后设计分析浇注系统、侧抽机构、推出机构和冷却系统的结构，再后对模具成型零件和注塑机进行校核，包括型腔壁厚、推出机构强度、装模厚度、注塑机锁模力、注射压力、注塑机行程等，综合运用IMOLD for SolidWorks和SolidWorks moldbase 模架库模块完成模架选型和模具的整体装配，最后用SolidWorks的工程制图模块完成该注塑模具中非标零件的工程图、模具装配图、爆炸图和零件制造工艺卡完成模具的制造。对于注塑模具进行的CAE分析，该设计是使用SolidWorks 模具模块，在软件使用过程中根据塑件的结构对浇注系统进行结构优化和对冷却水道进行恰当布局，防止或降低零件出现各种缺陷。通过对多组有效的数据进行整理，再对得到的结果多次比较、修整、改进、再分析，得到模具的最优化设计方案；关键词：注塑模；座椅脚垫；方案优化；SolidWorks；CAE；Abstract This paper is about the design and manufacture of seat pad injection mold design and analysis. Through the foot pad to achieve the functional analysis, requiring plastic parts with high strength, impact resistance, wear and other properties, considering the choice of ABS as the plastic material. Firstly, the shape parameters of the plastic parts are obtained by reverse engineering. The software is used to model the appearance of the plastic parts. The 3D format is saved in the STEP format. The SolidWorks2015 is used to analyze and create the parting surface. By forming the forming parts of the mold. And then design and analysis of pouring system, side pumping mechanism, the introduction of institutions and cooling system structure, and then the mold forming parts and injection molding machine to check, including cavity wall thickness, the introduction of mechanical strength, mold thickness, injection molding machine clamping force , Injection pressure, injection molding machine travel, etc., the integrated use of IMOLD for SolidWorks and SolidWorks moldbase module library module to complete the mold selection and mold the overall assembly, and finally with SolidWorks engineering drawing module to complete the injection mold non-standard parts of the drawing