数字图像处理中英文文献外文翻译.doc

外文文献翻译 Tian, X., Wang, X., Wang, L., Dong, H. (2012). Application of digital image processing in the measurement of casting surface roughness.?International Conference on Computer Science and Information Processing?(pp.19-21). IEEE. 原文 Application Of Digital Image Processing In The Measurement Of Casting Surface Roughness Tian, X., Wang, X., Wang, L., Dong, H Ahstract This paper presents a surface image acquisition system based on digital image processing technology. The image acquired by CCD is pre-processed through the procedure of image editing, image equalization, the image binary conversation and feature parameters extraction to achieve casting surface roughness measurement. The three-dimensional evaluation method is taken to obtain the evaluation parameters and the casting surface roughness based on feature parameters extraction. An automatic detection interface of casting surface roughness based on MA TLAB is compiled which can provide a solid foundation for the online and fast detection of casting surface roughness based on image processing technology. Keywords：casting surface; roughness measurement; image processing; feature parameters ⅠINTRODUCTION Nowadays the demand for the quality and surface roughness of machining is highly increased, and the machine vision inspection based on image processing has become one of the hotspot of measuring technology in mechanical industry due to their advantages such as non-contact, fast speed, suitable precision, strong ability of anti-interference, etc [1,2]. As there is no laws about the casting surface and the range of roughness is wide, detection parameters just related to highly direction can not meet the current requirements of the development of the photoelectric technology, horizontal spacing or roughness also requires a quantitative representation. Therefore, the three-dimensional evaluation system of the casting surface roughness is established as the goal [3,4], surface roughness measurement based on image