191红皮书题目整编.docVIP

1. A system administrator suspects that a colleague rebooted their server the previous evening. Which of the following commands will confirm this suspicion?(A) A. uptime B. lastboot C. reboot -l D. bootinfo -t 2. Once the machine has been powered on, which of the following is the correct way to reach the Systems Management Services menu on a PCI machine?(D) A. Press the space-bar when the LED displays 262. B. Turn the key to Service mode when the LED displays 200. C. Choose SMS when the boot option menu appears on screen. D. Press the appropriate function key once the keyboard has been enabled. 3. While attempting a preservation install, all of the hardware connections appear to be correct. However, when trying to boot from CD-ROM, the machine ends up in diagnostics. Which of the following is the most likely cause of this problem?(D) A. The battery on the machine is bad. B. The root volume group is corrupt. C. The low-level debugger is not enabled. D. There is a hardware problem with the CD-ROM. 4. The marketing group within the Widget Company plans to implement a new database to house their demographic data. The administrator has requested a tape drive and an additional disk to support the installation of this new database. The IBM hardware engineer has connected the new equipment, and the machine has been rebooted. Which of the following commands should be used to verify the tape device is installed correctly?(B) A. lspv B. lsdev C. lstape D. lsdisk 5. The marketing group within the Widget Company plans to implement a new database, as in question one. The new tape drive appears to be installed and functioning correctly. However, while attempting to perform a mksysb utilizing the new drive, it fails. What would be the first recommended action to take to determine the cause of the failure?(C) A. Replace the tape drive. B. Run cfgmgr to reconfigure the tape device. C. Check the error log for tape drive errors. D. Use SMIT to change the compression attribute on the t