官方说明书intersil X95840 数据手册.pdfVIP

X95840 ® Quad Digital Controlled Potentiometers (XDCP™) Data Sheet July 5, 2006 FN8213.2 2 ® Low Noise/Low Power/I C Bus/256 Taps Features The X95840 integrates four digitally controlled • Four Potentiometers in One Package potentiometers (XDCP) on a monolithic CMOS integrated • 256 Resistor Taps-0.4% Resolution circuit. 2 • I C Serial Interface The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The - Three address pins, up to eight devices/bus position of the wipers are controlled by the user through the • Wiper Resistance: 70Ω Typical @ 3.3V 2 I C bus interface. Each potentiometer has an associated • Non-Volatile Storage of Wiper Position volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR), that can be directly written to and read by the • Standby Current 5µA Max user. The contents of the WR controls the position of the • Power Supply: 2.7V to 5.5V wiper. At power up the device recalls the contents of the four • 50