官方说明书HUBER SERIES QN COAXIAL CONNECTORS.pdf

SERIES QN, COAXIAL CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER QN coaxial connectors are avail- Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 able with 50 impedance. The frequency range ex- Interface dimensions . . . . . . . . . . . . . . . . . . . . . . 191 tends to 11 GHz, depending on the connector and Features of QN connectors . . . . . . . . . . . . . . . . . 191 cable type, however most of the QN connectors are Re- Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . 192 turn Loss optimised for frequencies up to 6 GHz. The in- Cable connectors . . . . . . . . . . . . . . . . . . . . . . . . 194 terface is based on the inner dimensions of the N con- Receptacles with solder end . . . . . . . . . . . . . . . . 197 nector, but, instead of a threaded coupling mechanism, QN-calibration . . . . . . . . . . . . . . . . . . . . . . . . . 198 a new snap-lock mechanism is used. The QN interface has a very similar performance to the N, but in addition it offers an easier, faster and saver coupling operation, helping the customers to save signif- icantly time during production of their systems. The packaging density of QN increased compared to N thanks to the fact that no torque spanner is required to fasten the coupling nut. Additionally the outer dimen- sions of QN are smaller than N, leading to the advan- tage that TNC-size flanges can be used at QN connec- tors. N INTERFACE DIMENSIONS (COMPARED TO N) FEATURES OF QN CONNECTORS Q Plug (male) Cycle time improveme